Hardwood Furniture

Best Way to Protect Your Hardwood Floors From Your Furniture

Best Way to Protect Your floors from getting scratched daily, consider using cloth furniture protectors under the feet or legs of your tables, chairs, and heavy furniture. Also consider removing shoes, especially high heels and shoes that can scuff and scratch the floor. For pets and kids that regularly track through your home, you will have to be more diligent for keeping up with sanding and maintenance. While many homeowners feel scratches and natural wear can add to the character of the flooring.

Since hardwood is made from natural wood products, the tendency for flooring to expand and contract is natural. Although, when your flooring tends to raise and dip in areas unnaturally, this is called cupping. This can occur from humidity, a plumbing leak, or sitting water.  Be aware of areas of your floor that don’t feel even and investigate where the root of the cause is before your flooring is ruined. Once you find the source your floor can be renewed with sanding. For areas that have been cupping for long periods of time, it may be necessary to replace the entire plank or several planks of your hardwood flooring.

There are a few different types of protectors on the market. Some are good, some are not so good. There are “tap-on” type pads with either a plastic or felt bottom, slip-on pads with the same type of bottoms, or peel and stick pads. Regardless of which you choose, there are a few things to be aware of.

 

Hardwood Flooring Protectors – Tap On Pads

The “tap on pads” are held on by a small tack or a type of hollowed out nail. These are usually good for big, heavy furniture like a sofa or dining table that won’t be moved much.

If these are used on kitchen or dining chairs they are more likely to break off due to the constant movement. If this happens you can be left with a small piece of the metal in the bottom of the leg and if this isn’t caught right away, it can cause serious damage to your floor.

Protecting Your Wood Floors with Slip On Pads

Slip-on pads are generally made of rubber or soft plastic and will usually fit over a chair leg up to a 1.25″ diameter. If fit properly, there should be no problem with them coming off. The problem I’ve found with this type is with the bottom covering.

The ones that are rubber will tend to leave scuff marks on the floor. The plastic ones will, over time, wear down the finish on the floor. The others are felt covered and work well for a while depending on the thickness of the felt. Very thin felt will wear off down to the plastic and again cause damage to the finish.

Peel and Stick Pads for Wood Flooring Protection

The peel and stick pads are the simplest and least expensive of the three and can be found in most hardware and home improvement stores. The different size and shaped pads are typically made out of felt. Just peel off the paper backing and stick them to the bottom off the chair leg. The thinner pads have a bad habit of peeling off fairly quickly so I suggest using a thicker one.

Keep in mind that if the bottom of the leg is not sitting level on the floor, you may need to sand it down flat so that the full surface of the leg is on the floor. If not, it may scratch the floor finish or even gouge the wood itself. Another thing is to periodically turn the chair over and clean the dust and debris that may accumulate in the pad. If not, this may damage the floor as well.

 

Read more

Best Furniture Pads for Hardwood Floors

Inspection of a metal glide reveals a metallic coating that becomes easily and permanently damaged by surface scratches leaving chards of metal protrusions that act like razor blades and slice into the floor’s surface with every twist, shift or move of the chair or table. Moisture from routine cleaning further complicates the problem leaving permanent rust stains on the floor’s surface when the cleaning water migrates under the protector and dwells for an extended period of time.

Plastic glides are hard and fragile resulting in broken remnants that contribute to severe flooring damage. Dirt and debris press into the surface of plastic protectors that can be more damaging than coarse sandpaper when the chair is repeatedly moved across the floor’s surface.

The rule for floor protector selection is simple: Hard floor protectors (plastic or metal) for soft-surface (carpeted) flooring and soft protectors (felt) for hard-surface floors.

Hard plastic and metal protectors quickly degrade resulting in permanent damage on hard surface floors that can seldom be reversed. In my opinion, neither of these are viable options. Felt is the best as it provides a soft material that glides easily across the floor and dirt and debris that becomes embedded in the felt, buries into the soft texture of the glide minimizing and often avoiding permanent or severe damage to the floor.

Since furniture floor protector pads are on the floor continuously, they can quickly degrade. Like automobiles they require routine care and maintenance to perform their best. Two situations arise with felt furniture floor protector pads that require ongoing attention from the end user.

First, embedded dirt and debris must be routinely removed and cleaned by vacuuming! Second, heavy moisture, as typically used for cleaning hard surface floors, becomes absorbed by felt protectors leaving the felt pads hard and coarse when dry. This coarse texture can scratch a hard surface floor. To avoid replacing felt furniture pads that become crusty due to moisture, take an extra step after vacuuming and briskly brush the pads with a small wire brush to soften the texture of the felt. These simple steps will add months of life to felt furniture pads before they require replacement.

Most important is a point person at the end user facility who is responsible for floor protector maintenance. This involves routinely checking felt pads and cleaning or replacing on a routine basis as needed. This schedule varies with the traffic and use in each, different, facility.

There are some best nylon furniture glides protector.

Nylon Furniture Glide Diameter pack

Nylon Glide Diameter pack

Dia Nylon Glide pack

Shepherd-Hardware Nylon Glide

D-H-S Slider Glides Chairs Stools

Crescent Shaped Slider Glides Chairs

Read more

Protect Your Hardwood Floors from Chairs and Furniture

A popular form of chair leg protection is the chair glide or furniture pad. Quite simply, these are pads made of different types of material that are put on the bottoms of your chair legs. There are different types of chair glides, each offering different levels of cost and protection.

 

Tap-on/nail-on pads

These types of pads are very secure since they are attached to the furniture leg with either a small nail or screw. Tap-on pads use different materials to make contact with your floor, depending on your floor type. Care should be used with tap-on pads because if they are not properly installed, the nail or screw may be exposed to harm your floor.

 

Self-adhesive pads

These are peel and stick pads that can be found almost everywhere. They are typically made of felt or rubber and are the least expensive. However, the adhesive on these pads won’t last as long as tap-on or slip-on pads.

 

Slip-on pads

These pads are made to fit over a chair leg and are often made of rubber or soft plastic. These won’t have a problem of falling off like a self-adhesive pad or have the potential to scratch your floor like a broken tap-on pad.

There are some best nylon furniture glides protector.

Nylon Furniture Glide Diameter pack

Nylon Glide Diameter pack

Dia Nylon Glide pack

Shepherd-Hardware Nylon Glide

D-H-S Slider Glides Chairs Stools

Crescent Shaped Slider Glides Chairs

Read more